Installing Logs - Procom FBD32RT Manual

INSTALLING LOGS

WARNING: Failure to position the parts in accordance
with these diagrams or failure to use only parts included
may result in property damage or personal injury.
CAUTION: After installation, and periodically thereafter,
check to ensure that no flame comes in contact with any
log. With the heater set to high, check to see if flames
contact any log. If so, reposition logs according to the log
installation instructions in this manual. Flames contacting
logs will create soot.
All logs
STEP 2: Install the log 2 on the right rear iron.
STEP 4: Install the log 4 on the right front angle.
Figure 22 - Installing Log Set
IMPORTANT: Make sure log does not cover any
burner ports (see Figure 22). It is very important to
install the logs exactly as instructed. Do not
modify logs. Use only logs supplied with heater.
STEP 1: Install the log 1on the left rear angle iron.
STEP 3: Install the log 3 on the left front angle.
STEP 5: Install the log 5 on the left front angle.
18