Accepting A Call From An Answering Machine - Siemens HiPath 2000 Operating Instructions Manual

Step by Step
Feature Settings g
Door opener on
3=change password
1=enable with ring
2=enable w/o ring
Feature Settings g
Door opener off
Opening the door with a code (at the door)
j
After ringing the bell, enter the five-digit code (using the
keypad or a DTMF transmitter). Depending on how the
door opener has been programmed, a doorbell call sig-
nal may or may not be forwarded.
Activating the door opener
N
Open the Program/Service menu
Select and confirm the option shown.
Select and confirm the option shown.
j
Dial the entrance telephone number.
j
Enter the five-digit code. Default code = "00000".
or
Select the displayed function and press the "OK" dialog
key to change the code.
Select and confirm the option shown.
or
You can also open the door without a doorbell ring.
Deactivating the door opener
N
Open the Program/Service menu
Select and confirm the option shown.
Select and confirm the option shown.

Accepting a call from an answering machine

If an answering machine is connected to your system
(ask the responsible technician) and you have pro-
grammed the answering machine's internal number on
a key page 68, you can accept the call from the an-
swering machine.
R
The LED lights up. Press the key shown.
Enhanced phone functions
page 29.
page 29.
47