1.5 ENTIRELY BLANK COPY
Is the used paper moist?
No
Yes
Replace the paper.
Are the terminals of the charge corona unit and the T& S corona unit connected properly?
Yes
No
Set the terminals properly.
Is the charge corona wire or the T & S corona wire broken?
No
Yes
Replace the broken part.
Are the charge corona and transfer corona applied?
Yes
No
Check the main board, charge/bias/grid power pack, and T & S power pack.
Does leakage occur in the T & S endblocks?
No
Yes
Replace the defective parts.
Are the development drive gears broken?
No
Yes
Replace the broken gears.
Check the drum drive mechanism.
FSM
6-5
A163