Mode No.
Roll Feeder
Cutting Length
45
Adjustment (1100
mm, Plain Paper)
Roll Feeder
Cutting Length
46
Adjustment (1100
mm, translucent
Paper)
Roll Feeder
Cutting Length
47
Adjustment (1100
mm, Translucent
Film)
48
Not Used
Main Motor Speed
Adjustment
49
Toner End
Detection Setting
50
Used Toner
51
Used Toner
Counter
52
FSM
Function
To adjust the cutting length of 1100 mm in
the plain paper mode.
To adjust the cutting length of 1100 mm in
the translucent paper mode.
To adjust the cutting length of 1100 mm in
the translucent film mode.
To change the main motor speed.
Determines the possible number of copies
(when A1 paper is used) after the toner near
end condition.
Determines the total copy length before the
toner overflow indicator lights.
Indicates the copy length after clearing the
used toner counter. This counter is
automatically cleared if the clear mode key is
pressed after turning off and on the main
switch in the full toner condition.
4-13
Data
0: Standard
--50.0←0→ 50.0 mm
Longer
Shorter
0: Standard
--9 ← 0 → 11
Slower
Faster
If the main motor
speed is incorrect,
PJ56 or PJ57 will be
indicated when a long
copy is made. In
these cases this
adjustment is
required.
0: 27 sheets
1: 9 sheets
2: 18 sheets
3: 36 sheets
0: 1220
1: 610
2: 915
3: 1000
4: 1464
5: 1830
6: 2000
7: 2440
8: No overflow
indication
9: 10m (Should be
used for test)
tF=XX,XXX
(Beeper)
A163