[D]
1. Lower the feet [A] so that the table does not move while the copier is being
installed on the table.
2. Place the copier [B] on the table [C] (Place the copier feet [D] into the table
holes [E]).
WARNING
The copier is not attached to the table. Pushing the copier too hard may
cause it to drop onto the floor. While moving the copier, push the table.
SM
[E]
[C]
3-5
INSTALLATION PROCEDURE
[A]
A252I500.WMF
[B]
[E]
A251/A252