Ricoh A163 Service Manual page 123

12. Set the multimeter range at dc 200 µA.
13. Select SP mode No. --16.
14. Press the
15. Check the multimeter. Press the
using
± 2.5 µA.
16. If the voltage is within that of the standard voltage, press the
17. Select SP mode No. --17.
18. Press the
19. Check the multimeter. Press the
using
± 2.5 µA.
20. If the voltage is within that of the standard voltage, press the
FSM
key to turn on the separation corona.
and keys so that the dc separation current is dc --20
key to turn on the separation corona.
and keys so that the dc separation current is dc --20
key and then change the current
key and then change the current
5-25
Rev. 5/95
key.
key.
A163