Ricoh A163 Service Manual page 129

[A]
[E]
[C]
[B]
5.7 HOT ROLLER THERMISTOR REPLACEMENT
1. Remove the fusing unit.
2. Remove the 4 screws [A] of the fusing stay.
3. Disconnect the thermofuse connector [B] from the fusing lamp harness [C].
4. Remove the hot roller thermistor [D] (1 screw and 1 spring, 7 clamps [E]).
5.8 FUSING THERMOFUSE REPLACEMENT
1. Follow step 1 to 3 of the hot roller thermistor replacement.
2. Remove the fusing thermofuse [F] (1 screw and 4 clamps [G]).
FSM
[E] [D]
[E]
[F] [G]
5-31
[G]
[A]
A163