Ricoh A163 Service Manual page 232

INSTALLATION PROCEDURE
[E]
Temperature
NORMAL
HIGH (VELLUM)
LOW (FILM)
19. Plug in the power supply cord and turn on the main switch.
20. Press the following keys on the operation panel:
Clear Modes key [A]
+ key [B]
– key [C]
Clear/Stop key [D]
21. Press the Clear/Stop key again and hold it down for longer than 3 seconds. The
roll paper end and call service indicators will blink (SP mode).
22. Select 40 using the + and - keys. Enter "1" by pressing the following keys.
Function Select key [E]
+ key
RF Select key [F].
23. Input values into SP modes 42 to 47 in accordance with the decal that is
attached to stuck on the right side plate.
24. Press the Clear Modes key 3 times to leave the SP mode.
25. Reattach the roll feeder right cover.
26. Check the roll feeder operation.
A251/A252
[C] [B] [F]
Length
PRG.
300
NO.
XX 42
XX 43
XX 44
3-24
A571I514.WMF
PRG.
1100
NO.
XX 45
XX 46
XX 47
[A]
[D]
SM