Table of Contents
Advertisement
User manual SanStore-4EM / SanStore-8EM
5. To save the changes and exit the menu, press the [ENTER] button. Then go to the
"RECORD" menu.
6. Select "ON" or "OFF" to enable or disable the motion detection per camera, as shown
below.
Press the [REC] button to start the motion recording according to the configured
7.
recording quality and the frame rate when a motion is detected. It will be back to stand-
by mode after the motion recording time has ended.The camera does not record under
normal conditions.
Notes:
The motion recording will be extended if there is another motion detected during the
motion recording.
There may be cases when the motion detection function doesn't operate properly due
to the conditions of the video input signal or other factors.
It is recommended to select at least 3 motion blocks to get a more accurate motion
recording.
_________________________________________________________________________________
- 31 -
Advertisement
Table of Contents
