Display Options; Display Setup - Santec SanStore-4EM User Manual

6.2 Display options

6.2.1 Display setup

Procedure:
Use the direction buttons [
to display the "configuration".
Use the left/right buttons [
bold.
Use the down button [
Use the [- + ] button to change the values.
ITEM
STATUS BAR
CAMERA
BORDER LINE
BACKGROUND
DISPLAY
DEVICE
To save the changes and exit the menu, press the [MENU] button.
To exit the menu without saving the changes, press the [CANCEL] button.
_________________________________________________________________________________
] to access the "display" menu. Then press [ENTER]
] to go to the next tab. The selected item is displayed in

] to select the item.
Select "show" or "hide" to define whether the below status bar should be
displayed on the main monitor or not.
Select on-screen-display information for the camera number and title.
Select the colour of the board lines between the different cameras:
White, grey, dark grey, black.
Select the background colour in case of NO VIDEO status, i.e. when no
video is running.
Grey, dark grey, black, blue, white
Select On-Screen-Display coordinates on the monitor.
- CCTV: Displays properly at CCTV Monitors
- VGA : Displays properly at VGA Monitors.
User manual SanStore-4EM / SanStore-8EM
ADJUSTMENT
- 24 -