Log List Search, Alarm, Motion Detection - Santec SanStore-4EM User Manual

8.2 Log list search, alarm, motion detection

The logs can be used to search and review a point in time of the recorded data. Alarm,
motion, video loss and system related logs can be searched and played back directly from
the time of the incident.
. To start the event search, press the
list menu pops up, as shown below.
MENU TAP
ALL
SYSTEM
ALARM
MOTION
VIDEO LOSS
Use the up/down buttons [] to go to "Time".
2.
Use the left/right buttons [] to move to the next page.
3. Press the [ENTER] button to start the playback.
Note:
The log lists are saved on the HDD.
You may also save the log lists on a USB stick. Stick it into the USB port and press the
[MENU] button
_________________________________________________________________________________
It has a list of all events since the initial power on of the DVR.
It shows all events except for alarm, motion and video loss.
It shows all alarm lists.
It shows all motion lists.
It shows all video loss lists.
User manual SanStore-4EM / SanStore-8EM
[Log] button on the remote control. The log
CONDITION
- 58 -