Santec SanStore-4EM User Manual page 30

User manual SanStore-4EM / SanStore-8EM
ITEM ADJUSTMENT
Determines the duration of the recording when motion is detected.
RECORD TIME
(10 sec – 300 sec)
CAMERA
Use the left/right buttons [ ] or the numeric buttons to select the camera you
SECTION
wish to configure.
MOTION LEVEL Level 1 = Low sensitivity; level 20 = High sensitivity.
Use this menu to setup zones for the motion detection The screen shown below
will overlay the current video image.
It is divided into 16 grids and selected by the numeric buttons on the remote
control.
: Select all.
: : Clear all.
The motion detection zones will be marked in green.
Motion detection zones
Use the [ + ] button to select the motion grid. The running man icon will be
activated. The [ + ] button is used for selecting and cancel. Use the [ - ] button to
MOTION GRID
exit from the grid menu.
It is also possible to select smaller motion grids for more precise motion
detection by using the SanView software.
_________________________________________________________________________________
- 30 -