Updating System Software; Key Lock Operation - Santec SDVR-1/TX-S User Manual

3. Highlight SYSTEM and press the Enter
15
button to
SETTING page.
4. Set SD SETUP to SAVE. Then the
system setting info will auto save into SD
card.
3.5.4.2 Transfer the system setting info of
DVR to another:
1. Insert the SD card which has stored the
system setting info into the DVR.
2. Press the Setup button
setup mode and select the SYSTEM.
3. Highlight SYSTEM and press the Enter button
to enter the SYSTEM SETTING page.
15
4. Then set SD SETUP to LOAD.

3.5.5 Updating System Software

Please refer to section 2.4 for more details.

3.6 Key Lock Operation

The Key lock operation protects the unit
against unauthorized use by disabling the
entire front panel controls. Simultaneously
"<" and
11
press these two
for at least 3 seconds to lock the unit; to
release the Key Lock, simultaneously press
these two buttons again.
SYSTEM
enter the
9
to enter the
">" buttons
14
29