Update - Santec SanStore-4EM User Manual

User manual SanStore-4EM / SanStore-8EM

6.9.5 Update

1. Download the latest firmware file and copy it to a USB flash memory stick in the root
directory.
Note:
Please make sure to save all data onto the stick.
2. Connect the USB stick into the port of the recorder front panel.
3. Go to "update menu" and start the update by pressing the [ + ] or the [ENTER] button.
4. Wail until the update has been completed and the message "success" appears. Then
press the [ + ] button to reboot the recorder.
Notes:
As long as the update is in progress, no keys must be pressed and the recorder must
not be switched off.
Please contact your local distributors before initiating an update.
Indicator
BOARD VERSION
FPGA VERSION
BIOS VERSION
LINUX VERSION
APP VERSION
_________________________________________________________________________________
Shows the main PCB version of this unit.
Shows the FPGA version of this unit.
Shows the Bios version of this unit.
Shows the Linux version of this unit.
Shows the application version of this unit.
CONDITION
- 51 -