Table of Contents
Advertisement
User manual SanStore-4EM / SanStore-8EM
Set the recording dates:
o Begin: Start time of recording
o End:
o Mode: Up to 4 different recording modes can be pre-set (mode 1-4).
Set the recording mode:
Note:
Also see chapter "Continuous (normal) recording".
Note:
The recording time is set by using a 24-hour clock (0:00 to 23:59). If the recording is to run
longer than midnight, you have to set 2 days.
Example:
DAY
MON
TUE
The recording doesn't work if the end time is before or identical to the start time:
DAY
MON
Having made your settings, activate the schedule by pressing the [SCHEDULE]
button. The schedule indicator lights up. If the scheduled recording time is identical to
the current time, the recording will start immediately and the recording indicator lights
up. If no recordings are scheduled, no recording will be done.
Once the scheduled recording is over, the recording indicator is off and the recording
ends.
If you want to cancel a running recording, press the [SCHEDULE] button. The
schedule indicator is off and the recording ends.
_________________________________________________________________________________
End time of recording. The end time must not be prior to or identical to
the start time.
BEGIN
END
18:00
23:59
00:00
08:59
BEGIN
END
18:00
08:59
MODE
MODE 1
MODE 1
MODE
MODE 1
- 39 -
Advertisement
Table of Contents
