Preset And Tour; Custom Functions - Santec SanStore-4EM User Manual

The [MENU] button is the guide anchor position for all other buttons/functions.
If you are in PTZ mode, the buttons are valid for PTZ settings.
Note:
Please check the following before making any PTZ settings:
RS-422/485 connection and camera jumper settings
In the display menu, enter the ID and protocols of the PTZ camera.

7.2 Preset and tour

Button
Set the preset position. Press the [SPOT OUT] button on the remote
control.
a.
b.
c.
d.
e.
Go to the preset position. Press the [INFO] button on remote the
control.
a.
b.
Start auto tour. Press the [BACKUP] button on the remote control.
a.
b.
c.

7.3 Custom functions

Button
Please also read the user manual of your PTZ camera manufacturer in order to set the
correct jumper adjustments, aligned with the protocols of the recorder.
_________________________________________________________________________________
Move the PTZ camera into the desired position.
Press the [Preset] button.
"Custom 1" will illuminate.
Set the number for the preset position.
Press the [Enter] button to save the presets and to exit the menu.
Press the [Go] button.
Enter the desired preset number and the press the [Enter] button.
Press the [Auto Tour] button.
Press the [ + ] button and the enter the range of presets.
Press [Enter] to confirm.
First PTZ custom function: [DISPLAY] button on the remote control
Second PTZ custom function: [ZOOM] button on the remote control
Third PTZ custom function: [PTZ] button on the remote control
User manual SanStore-4EM / SanStore-8EM
Function
Function
- 54 -