Camera Setup - Santec SanStore-4EM User Manual

User manual SanStore-4EM / SanStore-8EM

6.3 Camera setup

Procedure:
Use the direction buttons [
confirm.
Use the left/right buttons [
to configure.
Use the down button [
Use the [ - + ] buttons to change the values.
ITEM DEFAULT
COVERT
BRIGHTNESS
CONTRAST
COLOR
CAMERA TITLE
P/T/Z MODEL
P/T/Z ID
Press [ENTER] to save the changes and to exit the menu.
Press [CANCEL] to exit the menu without saving the changes.
_________________________________________________________________________________
] to select „camera". Then press [ENTER] to
] or the numeric buttons to select the camera you wish

] to select an item.
If the covert mode is set to "YES", the selected camera is invisible
from all live displays, playback and network while continuing to
No
record. Covert cameras are viewable after changing the setting to
"NO" .
The brightness of each camera can be adjusted by pressing the
50%
[-,+] buttons.
The contrast of each camera can be adjusted by pressing the
50%
[-,+] buttons.
The color of each camera can be adjusted by pressing the
50%
[-,+] buttons.
A combination of 12 digits and alphabets can be entered to label
Camera each camera. Press the appropriate numeric button to type
thecamera title. It's up to 12 characters (also see chart on next
number
page)..
None Select the P/TZ camera model to be controlled.
Select appropriated channel for the PTZ camera. "Camera ID"
Camera
means "camera address".
number
ADJUSTMENT
- 27 -