Recording Disk (Hdd) - Santec SanStore 4/8/16LMX User Manual

User manual
SanStore 4/8/16LMX / SanStore 4/8/16MMX / SanStore 8/16HMX

7.5.2 Recording disk (HDD)

This information lists the installed drives and their respective capacities which are currently
used for recording.
3. Size, range:
It displays the currently recorded data size, the HDD size, the stored data range and
the status of the recording.
4. Device:
It displays whether the HDD is master or slave for mirroring. The upper device is the
master and the other one is the slave. Once the slave HDD is 100% synchronised,
the master HDD can be removed.
5. Status:
Stable:
Re-sync:
Recover:
6. Action Remove HDD.
The dialogue box "Are you sure?" opens.
Press the up/down [
to confirm your selection.
_________________________________________________________________________________
The HDD is in stable status.
All pending buffered data are copied to a new drive.
All pending buffered data are copied to a slave drive.
] buttons to select "YES" or "NO", then press the [-, +] button
- 63 -