Moving The Printer - Xerox WorkCentre 3655 User Manual

Moving the Printer

WARNINGS:
• To prevent dropping or tipping the printer, hold the printer between two people, with each
person using one hand underneath to hold the printer and the other hand on top to stabilize it.
• If the optional 550-Sheet Feeder is installed, uninstall it before you move the printer. If the
optional 550-Sheet Feeder is not fixed to the printer securely, it could fall to the ground and
cause injury.
Follow these instructions when moving the printer:
1. Turn off the printer and disconnect the power cord and other cables from the back of the printer.
For details, see Turning the Printer On and Off
WARNING: To prevent electric shock, never touch the power plug with wet hands. When removing
the power cord, ensure that you pull the plug and not the cord. Pulling the cord can damage it, which
can lead to fire or electric shock.
2. Remove any paper or other media from the output tray.
3. If the output tray extension is extended, close it.
4. Remove the paper from the paper tray.
Keep the paper wrapped and away from humidity and dirt.
on page 36.
Xerox® WorkCentre® 3655 Multifunction Printer
Maintenance
157
User Guide