Configuring Trays 1-4 For The Paper Length - Xerox WorkCentre 3655 User Manual

Configuring Trays 1–4 for the Paper Length
You can adjust the lengths of trays 1-4 to accommodate A4/Letter and larger paper sizes. For the longer
length settings, the trays protrude from the front of the printer.
To change the 550-Sheet Feeders in trays 1–4 to match the paper length:
1. Remove all paper from the tray.
2. To remove the tray from the printer, pull out the tray until it stops, lift the front of the tray slightly,
then pull it out.
3. To extend the tray, with one hand, hold the back of the tray. With the other hand, at the front of
the tray, press the release latch and pull the ends outward until they latch.
4. To protect the paper, place the paper cover over the extended section of the paper tray.
Xerox® WorkCentre® 3655 Multifunction Printer
Paper and Media
57
User Guide