Xerox WorkCentre 3655 User Manual page 55

3. If the bypass tray is loaded with paper already, remove any paper that is a different size or type.
4. Raise the paper stop.
5. Move the width guides to the edges of the tray.
6. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
Note: To avoid jams and misfeeds, do not remove paper from its packaging until you are ready to
use it.
7. Load the paper in the tray.
Note: Do not load paper above the maximum fill line. Overfilling the tray can cause the printer to
jam.
Xerox® WorkCentre® 3655 Multifunction Printer
Paper and Media
55
User Guide