Contrast; Printing Cover Pages; Printing Insert Pages - Xerox WorkCentre 3655 User Manual

Contrast

Contrast allows you to adjust the variation between light and dark areas of the print job.
1. To adjust the contrast, move the slider to the right to reduce the contrast or to the left to increase
the contrast.
2. Click OK or Apply.

Printing Cover Pages

A cover page is the first or last page of a document. You can select paper sources for the cover pages
that are different from the source used for the body of a document. For example, you can use your
company letterhead for the first page of a document. You can also use heavyweight paper for the first
and last pages of a report. You can use any applicable paper tray as the source for printing cover pages.
Select one of these options for printing cover pages:
• No Covers does not print cover pages. No cover pages are added to the document.
Front Only prints the first page on paper from the specified tray.
•
Back Only prints the back page on paper from the specified tray.
•
• Front and Back: Same prints the front and back cover pages from the same tray.
Front and Back: Different prints the front and back cover pages from different trays.
•
After making a selection for printing the cover pages, you can select the paper for the front and back
covers by size, color, or type. You can also use blank or pre-printed paper, and you can print side one, side
two, or both sides of the cover pages.

Printing Insert Pages

You can add blank or pre-printed insert pages before page one of each document or after designated
pages within a document. Adding an insert after designated pages within a document separates
sections, or acts as a marker or placeholder. Ensure that you specify the paper to use for the insert pages.
Insert Options provides the options to place an insert After Page X, where X is the specified page, or
•
Before Page 1.
Insert Quantity specifies the number of pages to insert at each location.
•
Pages specifies the page or range of pages that use the exception page characteristics. Separate
•
individual pages or page ranges with commas. Specify pages within a range with a hyphen. For
example, to specify pages 1, 6, 9, 10, and 11, type 1,6,9-11.
Paper displays the default size, color, and type of paper selected in Use Job Settings. Click the Down
•
arrow to the right of the Paper field to select a different paper size, color, or type.
Job Setting displays the attributes of the paper for the remainder of the job.
•
Xerox® WorkCentre® 3655 Multifunction Printer
Printing
79
User Guide