Cleaning The Exterior; Cleaning The Scanner - Xerox WorkCentre 3655 User Manual

Cleaning the Exterior

Clean the exterior of the printer once a month.
• Wipe the paper tray, output tray, control panel, and other parts with a damp, soft cloth.
• After cleaning, wipe with a dry, soft cloth.
• For stubborn stains, apply a small amount of mild detergent to the cloth and gently wipe the stain
off.
CAUTION:
Do not spray detergent directly on the printer. Liquid detergent could enter the printer
through a gap and cause problems. Never use cleaning agents other than water or mild detergent.

Cleaning the Scanner

Clean the scanner about once a month, when anything is spilled on it, or when debris or dust collect on
any of the surfaces. Keep the feed rollers clean to ensure the best possible copies and scans.
Cleaning the Scanner
1. Slightly dampen a soft, lint-free cloth with water.
2. Remove any paper from the duplex automatic document feeder.
3. Open the duplex automatic document feeder top cover.
Xerox® WorkCentre® 3655 Multifunction Printer
Maintenance
149
User Guide