Yealink SIP-T23P User Manual page 98

User Guide for the SIP-T23/T23P/T23G IP Phone
group and search for the contact (Directory and remote phone book should be
configured in advance. Refer to
on page
3. Press the Send soft key,
4. Press
ringback.
To perform an attended transfer:
1. Press
2. Do one of the following:
Enter the number you want to transfer the call to.
-
Press the Dir soft key, and then select Local Directory. Select the desired group,
-
and search for the contact (Directory should be configured in advance. Refer to
Directory
- Press the Dir soft key, and then select History. Select the desired list and use
or
Directory
Press the Dir soft key, and then select Remote Phone Book. Select the desired
-
group and search for the contact (Directory and remote phone book should be
configured in advance. Refer to
on page
3. Press the Send soft key,
4. After the party answers the call, press
transfer.
If you are using a handset, the transfer can be completed by hanging up the handset.
You can cancel the transfer before the call is connected by pressing the Cancel soft key.
You can enable or disable call waiting on the phone. If call waiting is enabled, you can
receive another call while there is already an active call on the phone. Otherwise,
another incoming call is automatically rejected by the phone with a busy message
when there is an active call on the phone. You can also enable or disable the phone to
play a warning tone when receiving another call.
88
42 for more information.).
or
or the Tran soft key to complete the transfer when receiving the
or the Tran soft key during a call.
on page 29 for more information.).
to select the entry (Directory should be configured in advance.Refer to
on page 29 for more information.).
42 for more information.).
or
Directory on page 29 and
to dial out.
Directory on page 29 and
to dial out.
or the Tran soft key to complete the
Remote Phone Book
Remote Phone Book