Yealink SIP-T23P User Manual page 128

User Guide for the SIP-T23/T23P/T23G IP Phone
After configuring an ACD key, you can press the ACD key to log into the
After logging in, you are ready to receive calls from the
ACD key to show your current ACD user status. You can press the Avail/Unavail soft key
to change your ACD user status. ACD user status synchronizes on both IP phone and
ACD system. When you set the ACD user status to be available, the ACD key LED
illuminates solid green, and then the server begins distributing calls to your phone.
When you set the phone to be unavailable, the ACD key LED flashes green, and then the
server temporarily stops distributing calls to your phone. To log out of the
press the Logout soft key.
Note
It is recommended you configure no more than one ACD key per phone. At any time, at
most one ACD key can be in progress on your phone.
You can send and receive text messages using the SIP-T23(P/G) IP phone. New text
messages can be indicated both acoustically and visually. When receiving a new text
message, the phone will play a warning tone, and the LCD screen will prompt receiving
new text messages with the number of waiting messages (example: 1 New Text
Message(s)) and a flashing icon.
Note
When the phone receives a text message, the text message prompt window will pop up
by default, if you want to disable the feature, contact your system administrator for more
information.
You can store text messages in your phone's Inbox, Sentbox, Outbox or Draftbox. Each
of the boxes can store up to 100 text messages. If the number of the text messages in
one box is more than 100, the phone will directly delete the oldest text message in the
box.
Note
SMS is not available on all servers. Contact your system administrator for more
information.
118
ACD system
. You can press the
ACD system
ACD system
.
,