To use this feature, contact your system administrator for the network conference URI in
advance.
To configure network conference via web user interface:
1.
Click on Account.
2.
Select the desired account from the pull-down list of Account.
3.
Click on Advanced.
4.
Select Network Conference from the pull-down list of Conference Type.
5.
Enter the conference URI (e.g., conference@example.com) in the Conference URI
field.
6.
Click Confirm to accept the change.
To set up a network conference call:
1.
Place a call to the first party.
2.
Press the Conf soft key to place a new call.
The active call is placed on hold.
3.
Enter the number of the second party and press
4.
When the second party answers the call, press the Conf soft key to add the second
party to the conference.
5.
Press the Conf soft key to place a new call.
The conference is placed on hold.
6.
Enter the number of the new party and then press
7.
When the new party answers the call, press the Conf soft key to add the new party
to the conference.
Basic Call Features
,
, or the Send soft key.
,
, or the Send soft key.
91