Page 1
Yealink IP Phone – SIP-T23P & SIP-T23G 29 January 2020 QUICK START GUIDE Yealink IP Phone SIP-T23P & SIP-T23G Applies to firmware version 44.82.0.10 or later. Version 1.0 Developed by: BUROSERV Australia Level 2, 9 Help Street Chatswood NSW 2067. Australia...
Yealink IP Phone – SIP-T23P & SIP-T23G Contents Packaging Contents ............................3 Assembling the DECT Phone ..........................3 Startup ................................5 Configuring Your Phone ........................... 5 Configuring via web user interface ....................5 Configuring via phone user interface ....................6 Basic Call Features ............................
The models displayed on the phone differ from each other. The packaging content "IP Phone" listed above takes a SIP-T23G IP phone as an example. • We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessories may result in reduced performance. ASSEMBLING THE DECT PHONE 1.
Page 4
Note: • The IP phone should be used with Yealink original power adapter (5V/600mA) only. The use of the third-party power adapter may cause the damage to the phone. If you are connecting a PC to your phone, we recommend that you use the Ethernet cable provided by Yealink.
Yealink IP Phone – SIP-T23P & SIP-T23G STARTUP After the IP phone is connected to the network and supplied with power, it automatically begins the initialization process. After startup, the phone is ready for use. You can configure the phone via web user interface or phone user interface.
Yealink IP Phone – SIP-T23P & SIP-T23G Note: • Check with your system administrator if any error appears during the registration process or a specific configuration is required for your registration. CONFIGURING VIA PHONE USER INTERFACE Network Settings: Press the...
Yealink IP Phone – SIP-T23P & SIP-T23G ENDING A CALL Using the handset: EndCall Hang up the handset or press the soft key. Using the speakerphone: Press or the EndCall soft key. Using the headset: Press the EndCall soft key.
Yealink IP Phone – SIP-T23P & SIP-T23G CALL FORWARD To enable call forward: Menu Features->Call Forward. 1. Press the soft key when the phone is idle, and then select 2. Select the desired forward type: Always Forward----Incoming calls are forwarded unconditionally.
Yealink IP Phone – SIP-T23P & SIP-T23G CUSTOMIZING YOUR PHONE CALL HISTORY 1. Press the History soft key when the phone is idle, press to scroll through the list. 2. Select an entry from the list, you can do the following: •...
Page 10
As one of the best providers in more than 140 countries and regions including the US, the UK and Australia, Yealink ranks No.1 in the global market share of SIP phones shipments.