Yealink SIP-T23P User Manual page 83

Auto answer is configurable via web user interface at the path Account->Basic.
Note
Auto answer is only applicable when there is no other call in progress on the phone.
You can enable auto redial to automatically redial a phone number when the called
party is busy. You can also configure the number of auto redial attempts and the time to
wait between redial attempts.
To configure auto redial via phone user interface:
1. Press Menu->Features->Auto Redial.
2. Press
3. Enter the desired time in the Redial Interval field.
The default time interval is 10 seconds.
4. Enter the desired number of redial attempts in the Redial Times field.
The default times are 10.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Auto redial is configurable via web user interface at the path Features->General
Information.
To use auto redial:
When the called party is busy, the following prompt will appear on the LCD screen of the
phone:
or , or the Switch soft key to select Enable from the Auto Redial field.
Basic Call Features
73