Yealink SIP-T23P User Manual page 75

For multiple numbers, enter a comma between every two emergency numbers. The
default emergency numbers are 112, 911 and 110.
3. Click Confirm to accept the change.
Note
Emergency number is configurable via web user interface only.
You can enable live dialpad on the SIP-T23(P/G) IP phone, which enables the IP phone to
automatically dial out a phone number without the pressing of the send key. You can
also configure a delay, where the phone will dial out the hotline number automatically
after the designated period of time.
To enable live dialpad via web user interface:
1. Click on Settings->Preference.
2. Select Enabled from the pull-down list of Live Dialpad.
3. Enter the desired delay time in the Inter Digit Time (1~14s) field.
Customizing Your Phone
65