Yealink SIP-T23G Quick Start Manual

2
4
5
Your Phone
1 Voicemail indicator
8 Transfer; Redial
2 Programmable 9 Speakerphone
feature keys
3 Feature Softkeys
4 Navigation cluster
5 Volume
6 Message
7 Headset
Copyright © 2018 CallSwitch.net. All rights reserved. Copyright © 2018 CallSwitch.net. All rights reserved.
Programmable Feature Buttons
Use these to program quick access softkeys.
The soft buttons' led lights change to indicate status:
1. Extension:
Steady lit - Active or connected to a call
Blinking - Incoming call to the line
Blinking slowly - The call to this line is on hold
Off - The line is inactive
2. BLF soft buttons:
Steady lit - Active or connected to a call
Blinking - Incoming call to the BLF
Steady lit - BFL Available
Off - BLF is inactive
CISCO IP PHONE 8851 CISCO IP PHONE 8851 YEALINK SIP T23G YEALINK SIP T41S
Make a Call
1. Pick up the handset.
1
2. Enter a number, and then press the Send soft key.
Answer a Call
Pick up the handset.
3
Using the speakerphone, press
6
Put a Call on Hold
7
Press the Hold soft key during an active call.
8
To resume a held call, press the Resume soft key.
9
View Your Recent Calls
1. Press the History soft key when the phone is idle,
press or to scroll through the list.
2. Select an entry from the list, you can do the following:
Press the Send soft key to call the entry.
Press the Delete soft key to delete the entry from the list.
Transfer a Call to Another Person
1. Press or the Tran soft key during a call. The
call is placed onhold.
2. Enter the number you want to transfer to.
3. Press or the Tran soft key.
Quick Start Guide Quick Start Guide Quick Start Guide Quick Start Guide
.
January 2018 January 2018