Yealink SIP-T23P User Manual page 131

You can leave voice mails for someone else using the SIP-T23(P/G) IP phone. You can
also listen to voice mails that are stored in a voice mailbox. When receiving a new voice
mail, the phone will play a warning tone and the MESSAGE key LED will illuminate. The
LCD screen will prompt that the phone receives a new message and display a flashing
icon.
Note
Voice mail is not available on all servers.
You can configure the phone not to display the pop-up prompt, contact your system
administrator for more information.
To leave a voice mail:
You can leave a voice mail for someone else when he/she is busy or inconvenient to
answer the call. Follow the voice prompt from the system server to leave a voice mail,
and then hang up.
To configure voice mail access codes via phone user interface:
1. Press Menu->Message->Voice Mail->Set Voice Mail.
2. Press
to select the proper input mode and then enter the voice mail access code.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
Voice mail access codes must be predefined on the system server. Contact your system
administrator for the more information.
or to select the account which you want to set, press the 123 soft key
Advanced Phone Features
121