User Guide for the SIP-T23/T23P/T23G IP Phone
To mute a call:
1.
Press
The LCD screen indicates that the call is now muted.
To un-mute a call:
1.
Press
You can place an active call on hold. Only one active call can be in progress at any time.
Other calls can be made and received while placing the original call on hold. When you
place a call on hold, your IP PBX may play music to the other party while waiting.
To place a call on hold:
1.
Press the Hold soft key during a call.
The LCD screen indicates that the call is on hold and the line key LED flashes green.
Note
The phone will beep softly every 30 seconds to remind you that you still have a call on
hold.
To resume a held call:
1.
Press the Resume soft key.
Multiple Calls on Hold:
If multiple calls are placed on hold, do one of the following:
Press
-
to retrieve the desired call.
Press the corresponding line key to retrieve the desired call.
-
76
during an active call.
again to un-mute the call.
or
to switch between the calls, and then press the Resume soft key