Yealink SIP-T23P User Manual page 108

User Guide for the SIP-T23/T23P/T23G IP Phone
You can also configure a DSS key as a group pickup key via phone user interface or
web user interface. Once configured, you can pick up a call by pressing the group
pickup key directly.
Note
The directed call pickup code and group call pickup code are predefined on the system
server. Contact your system administrator for more information.
The call pickup code configured on a per-line basis takes precedence over that
configured on a global basis.
You can use anonymous call to block your identify and phone number from appearing
to the called party when you call someone. For example, you want to call to consult
some of the services, but don't want to be harassed. Anonymous call is configurable on
a per-line basis. You can also configure the phone to send anonymous on/off code to the
server to activate/deactivate anonymous call on the server side.
Note
Anonymous call is not available on all servers. Contact your system administrator for the
anonymous call on code and off code.
To enable anonymous call via phone user interface:
1. Press Menu->Features->Anonymous Call.
2. Press
field.
3. Press
4. (Optional.) Press
field.
5. (Optional.) Enter the anonymous call on code and off code respectively in the Call
On Code and Call Off Code field.
Anonymous call on code/ off code is used to activate/deactivate the server-side
anonymous call feature when the user enables/ disables anonymous call feature on
the phone
6. Press the Save soft key to accept the change or the Back soft key to cancel.
Anonymous call is configurable via web user interface at the path Account->Basic.
98
or , or the Switch soft key to select the desired line from the Line ID
or to select Enable from the Local Anonymous field.
or to select the desired value from the Send Anony Code