Yealink SIP-T23P User Manual page 64

User Guide for the SIP-T23/T23P/T23G IP Phone
Usage: Press the DSS key to forward an incoming call to the number specified in the
Value field.
Note
If the Value field is left blank, the DSS key performs the same function as the Fwd soft key
when receiving an incoming call.
Tran
When there is an active call on the phone, you can use this key feature to handle the call
differently depending on the transfer mode assigned to the DSS key.
Dependencies:
Usage:
When the transfer mode on DSS key is Blind Transfer, press the DSS key to complete

the blind transfer to the number specified in the Value field.
When the transfer mode on DSS key is Attended Transfer, press the DSS key to dial

out the number specified in the Value field , and then you can perform the
attended or semi-attended transfer.
When the transfer mode on DSS key is New Call, press the DSS key to place a new

call to the number specified in the Value field.
Note
Transfer mode on DSS key is configurable via web user interface at the path
Features->Transfer->Transfer Mode Via Dsskey.
If the Value field is left blank, the DSS key performs the same function as the TRAN key or
the Tran soft key during a call. For more information, refer to
Hold
You can use this key feature to place an active call on hold or retrieve a held call.
Dependencies:
Usage:
1. Press the DSS key during an active call to place the call on hold.
2. Press the DSS key again to retrieve the held call.
54
Value (the number you want to forward to)
Type (Key Event)
Key Type (Tran)
Value (the number you want to transfer to)
Type (Key Event)
Key Type (Hold)
Call Transfer on page 87.