Display Assign - Icom IC-FR3000 Series Sales Handbook

3-1-2

Display Assign

Display Assign Display Assign Display Assign
Dealer programmable key [PROG] can be programmed
for one of several functions (see below).
Programmable Key Assign Programmable Key Assign
Programmable Key Assign Programmable Key Assign
• Opening Text Opening Text Opening Text Opening Text
- This set text appears for 2 sec. when turning the
repeater ON. To turn power ON without text
indication, set this item to blank.
- Up to 16 characters are available.
- Usable characters: ! " # $ % & ' ( ) * + - , . / : ; < > = ?
@ [ ] ^ _ ` { | } 0 to 9, A to Z, a to z and space.
• RF Power Selection RF Power Selection RF Power Selection RF Power Selection
- MR CH individual MR CH individual
MR CH individual MR CH individual
Output power keys, [High] and [Low], select power
temporarily. Returns to the previous power when
changing the channel.
- - - - Override Override Override Override
Output power keys select the power permanently.
• MR/Code Display (PMR only) MR/Code Display (PMR only) MR/Code Display (PMR only) MR/Code Display (PMR only)
Selects the indication text.
- - - - MR CH MR CH MR CH MR CH
Operating channel's text.
- - - - MR CH + TX CODE CH MR CH + TX CODE CH MR CH + TX CODE CH MR CH + TX CODE CH
Operating channel number and 10 letters of TX Code
channel's text (or 7 digits of code contents when text
is not programmed).
• Beep Beep Beep Beep
Confirmation beep tones generally sound when you
push a key or switch.
These can be turned ON or OFF to your preference.
You can program the repeater for silent operation or to
have confirmation beeps sound.
Display Assign
14