Panel Description - Icom IC-FR3000 Series Sales Handbook

⓰ ANI CLEAR SWITCH [ANI CLR] ANI CLEAR SWITCH [ANI CLR]
ANI CLEAR SWITCH [ANI CLR] ANI CLEAR SWITCH [ANI CLR]
Push for 1 sec. to clear the received ANI ID indication
on the display and returns to original indication.
▒ NOTE: NOTE: NOTE: This switch is no function available for some NOTE:
▒ versions.
⓱ DEALER DEALER- - - - PROGRAMMABLE SWITCH [PROG] PROGRAMMABLE SWITCH [PROG]
DEALER DEALER PROGRAMMABLE SWITCH [PROG] PROGRAMMABLE SWITCH [PROG]
Toggles the pre-programmed function ON or OFF
when pushed.
⓲ PROGRAMMED FUNCTION INDICATOR PROGRAMMED FUNCTION INDICATOR PROGRAMMED FUNCTION INDICATOR PROGRAMMED FUNCTION INDICATOR
Lights green while pre-programmed function is
activated.
⓳ DC INDICATOR DC INDICATOR DC INDICATOR DC INDICATOR
Lights green when in DC operation.
Rear panel Rear panel Rear panel Rear panel
❶ TRANSMIT ANTENNA CONNECTOR [TX/TX•RX] TRANSMIT ANTENNA CONNECTOR [TX/TX•RX] TRANSMIT ANTENNA CONNECTOR [TX/TX•RX] TRANSMIT ANTENNA CONNECTOR [TX/TX•RX]
➥Connects a transmit antenna (impedance: 50 )
and outputs transmit signals.
➥When installing an optional internal duplexer
(supplied by third party), this connects the
transmit receive to an antenna.
❷ EXTERNAL SPEAKER CONNECTOR [EXT SP] EXTERNAL SPEAKER CONNECTOR [EXT SP]
EXTERNAL SPEAKER CONNECTOR [EXT SP] EXTERNAL SPEAKER CONNECTOR [EXT SP]
Accepts a 4 external speaker.
❸ REMOTE CONNECTOR [REMOTE] REMOTE CONNECTOR [REMOTE]
REMOTE CONNECTOR [REMOTE] REMOTE CONNECTOR [REMOTE]
Connects to the remote controller.
• See p. 16 for remote connector information.
❹ ACCESSORY CONNECTOR [ACC] ACCESSORY CONNECTOR [ACC]
ACCESSORY CONNECTOR [ACC] ACCESSORY CONNECTOR [ACC]
Connects to the remote controller.
• See pgs. 15 for accessory connector information.
❺ RECEIVE ANTENNA CONNECTOR [RX] RECEIVE ANTENNA CONNECTOR [RX]
RECEIVE ANTENNA CONNECTOR [RX] RECEIVE ANTENNA CONNECTOR [RX]
➥Connects a receive antenna (impedance: 50 )
and inputs receiving signals.
➥When installing an internal duplexer (supplied by
third party), do not use this connector.

Panel Description

Function display Function display Function display Function display
❶ MEMORY CHANNEL INDICATOR MEMORY CHANNEL INDICATOR MEMORY CHANNEL INDICATOR MEMORY CHANNEL INDICATOR
❷ TRANSMIT POWER INDICATOR TRANSMIT POWER INDICATOR TRANSMIT POWER INDICATOR TRANSMIT POWER INDICATOR
❸ AUDIBLE INDICATOR AUDIBLE INDICATOR
AUDIBLE INDICATOR AUDIBLE INDICATOR
❹ ALPHANUMERIC INDICATORS ALPHANUMERIC INDICATORS ALPHANUMERIC INDICATORS ALPHANUMERIC INDICATORS
❻ AC POWER SOCKET [AC] AC POWER SOCKET [AC] AC POWER SOCKET [AC] AC POWER SOCKET [AC]
❼ GROUND TERMINAL [GND] GROUND TERMINAL [GND]
GROUND TERMINAL [GND] GROUND TERMINAL [GND]
❽ DC POWER INPUT TERMINALS [BATTERY] DC POWER INPUT TERMINALS [BATTERY]
DC POWER INPUT TERMINALS [BATTERY] DC POWER INPUT TERMINALS [BATTERY]
▒ CAUTION: NEVER CAUTION: NEVER CAUTION: NEVER CAUTION: NEVER short the (+) line of the DC power
▒ cable to repeater's chassis, when connecting DC
▒ power cable to the [BATTERY] terminals. Otherwise,
▒ there is danger of electric shock and/or equipment
▒ damage.
Shows the selected memory channel.
Shows the output power level.
"@" appears in an audible condition, disappears in
an inaudible condition. (When an audible condition,
audio mute is cancelled.)
Shows the variety text or code information.
Connects the supplied AC power cable to a domestic
AC outlet.
Ground the repeater through this terminal to prevent
electric shocks, TVI, BCI and other problems.
Connects the 12 V storage battery for the repeater
backup when the AC power is interrupted. These
terminals are also used for DC power operation.
12