Basic Setup Of Cloning Software - Icom IC-FR3000 Series Sales Handbook

Programming information Programming information
Programming information Programming information
• We recommend that you should read out all the
repeater's data before start entering/editing
parameters even if the repeater is factory fresh. This
avoids rare glitches which might cause programming
errors when writing back the altered parameters.
• CS-FR3000 has 2 model types. You can select the
desired model type which you are going to clone. LMR
(2Tone) or PMR (5Tone) is available. The Tree View
screen content will be changed when the model type is
switched.
LMR LMR LMR LMR
• Select the model type which you are going to clone
from; LMR (2Tone) and PMR (5Tone).
NOTE: NOTE: NOTE: NOTE: NOTE: NOTE: NOTE: NOTE:
The model type must be selected at first, otherwise the
edited contents will be lost.

Basic Setup of Cloning Software

PMR PMR PMR PMR
✔ LMR (2Tone)
PMR (5Tone)
• Double-click on the desired memory channel, or right-
click the cell then click [Edit Memory ...]
memory channel program screen.
Edit menu
Memory channel
program screen
[Edit Memory ...] [Edit Memory ...] to enter the [Edit Memory ...]
Edit Memory... Enter
______________________________________
Prio A
Emergency
Emergency OFF
______________________________________
Copy Ctrl+C
Paste Ctrl+V
______________________________________
Clear
Delete Delete
Insert Insert
29