Step 2 : Make The Network Settings On The Printer - Roland SOLJET Pro III XC-540 Setup Manual

7. Network Settings

Step 2 : Make the Network Settings on the Printer

Important !
The addresses used in this section are merely example settings. For detailed information about the settings,
consult your network administrator.
1.
Set the IP address.
–
MENU
SYSTEM INFO.
—
SYSTEM INFO.
NETWORK
˜
IP ADDRESS
000. 000. 000. 000
™
IP ADDRESS
192. 000. 000. 000
š
IP ADDRESS
192. 000. 000. 000
›
IP ADDRESS
192. 168. 0. 003
œ
NETWORK
IP ADDRESS
2.
Set the subnet mask.
–
NETWORK
SUBNET MASK
—
SUBNET MASK
000. 000. 000. 000
˜
SUBNET MASK
255. 000. 000. 000
™
SUBNET MASK
255. 000. 000. 000
44
Press .
Press
.
Press .
Press .
Press three times.
[IP ADDRESS] : 192.168.0.XXX
Note: Here, "XXX" may be any number you want from 2 to 254. However, be
sure to specify a number that does not duplicate the setting you made in Step 1.
Here, "192.168.0.003" is entered by way of example. Make the portion that
corresponds to "192.168.0" the same as the setting on the computer.
Use to select the address number.
Press .
™ š
Repeat and to set all the address numbers.
When you've finished making the setting, press
Press .
The screen shown in the figure appears again.
Press .
Press twice.
Use to select the address number.
[Subnet mask] : 255.255.255.0
Note: For the subnet mask, make the setting the same value as the one used by
the computer. Here, "255.255.255.0" is entered by way of example.
Press .
.