Edit; Time Code - Panasonic AJ-HPD2500P Operating Instructions Manual

EDIT

This function determines unit mode after a cue-up operation.
Item
FR SUPER
No. DISP.
315 AFTER CUE-UP

TIME CODE

This menu sets the time code.
Item
FR SUPER
No. DISP.
500 VITC BLANK
501 VITC POS-1
190
Setup: Item Settings
Setting
FR SUPER
No. DISP.
0000 STOP Selects unit mode after cue-up operation.
0001 STILL 0: STOP mode
1: Still picture (SHTL +0.0) mode
0002 STILL2
2: Still picture (VAR +0.0) mode
Setting
FR SUPER
No. DISP.
0000 BLANK
59.94Hz
0001 THRU
Specifies whether or not a VITC signal will be output at the positions selected in setup
menu No. 501 (VITC POS-1) and No. 502 (VITC POS-2) during playback.
0: VITC signals are not output.
1: VITC signals are output.
NOTE:
• This setting is available only during analog composite output and SD SDI output.
• In EE mode, the input signal is output with the VITC signal.
When set to
59.94Hz
59.94 Hz, 29.97 Hz
Specifies the position where the VITC signal will be inserted.
0000 10L
NOTE:
| |
• You cannot select the same line as in setup menu No. 502 (VITC POS-2).
0006 16L
• The VITC signal is not output when 23.98, 24, 59-23, 60-24, or 60-25 is selected in
| |
setup menu No.25 (SYSTEM FREQ).
0010 20L
• You cannot select the same line as in setup menu No.692 (UMID POS).
When set to
• This setting is available only during analog composite output and SD SDI output.
50 Hz, 25 Hz
• This setting does not return to the factory default even if you press the SEARCH button
and RESET button simultaneously.
0000 7L
| |
0004 11L
| |
0015 22L
• XX indicates factory default settings.
Settings and brief function description
• XX indicates factory default settings.
Settings and brief function description
50Hz 29.97Hz 25Hz
50Hz 29.97Hz 25Hz
only
only