Table of Contents
Advertisement
■ Information display during continuous playback
• When the PROP (SHIFT + TC PRESET) button is held down
during playback, the following screen appears.
1)
2)
3)
1)
C (Current) and N (Next) indicators
"C" appears in the row for the P2 card slot with the clip
being played. "N" appears in the row for the P2 card slot
with the clip to be played next.
2)
* indicator
An asterisk (*) appears in the row for a P2 card slot that
includes playable clips.
3)
P2 card slot number
4)
Start time code
Displays the time code at the beginning of the clip to be
played first in each P2 card slot.
• When setup menu No.006 (DISPLAY SEL) is set to T&S&M,
the number of the P2 card slot with the clip being played
and that with the clip to be played next are indicated on the
third row of the superimpose display.
1)
2)
1)
Number of the P2 card slot with the clip being played
2)
Number of the P2 card slot with the clip to be played
next
The symbol "-" is displayed if no clip is played next.
4)
Clip Management: Continuous Playback of Clips by Inserting/Removing P2 Cards
◆ NOTE:
• The slot(s) and clip(s) located before the cursor position on the
thumbnail screen when playback starts are not included for
continuous playback.
• The STOP and STILL/PAUSE buttons are only operative during
playback. When [THUMBNAIL] – [SETUP] – [STOP MODE] is
set to STAY, the unit enters playback pause mode when the
button is pressed, and continuous playback resumes if you
press the PLAY button.
• Playback is not possible when the cursor is placed on a
thumbnail with the SPANNED indicator.
• The playback start position of a clip is specified on the setup
menu [THUMBNAIL] – [SETUP] – [PB POSITION].
• Do not remove a P2 card during playback when the P2 card
access LED flashes orange.
• Do not insert a P2 card that is unformatted, contains an error, or
includes a clip with an error during playback, or do not repeat
inserting and removing a P2 card at short intervals. Doing so
may stop playback.
• If a P2 card is inserted into the next slot to be played back, just
before starting playback of that slot or during transition to
playback, the inserted P2 card may only be played back after
all the slots have been played back once.
63
Advertisement
Table of Contents
