Table of Contents
Advertisement
Item
FR
SUPER
No.
DISP.
032
REC REF
034
A.SMPL RES
040
VFR REC
041
LOOP REC
050
P.ON GUI
051
GUI OUTPUT
184
Setup: Item Settings
Setting
FR
SUPER
No.
DISP.
0000
NORMAL
59.94Hz
0001
SLTC
Specifies the reference to synchronize the frames for recording.
0: The input video signal is automatically identified and serves as reference.
1: The time code which is input to the SD I IN connector is identified and serves as
reference.
NOTE:
When the SLTC is selected, the following settings are necessary to validate the settings
for this item:
• Setup menu No. 25 (SYSTEM FREQ): 59.94
• Setup menu No. 020 (SYS FORMAT): 720p
• VIDEO IN (SHIFT+EDIT MODE) button on the unit: HDSDI
0000
16BIT
0: Audio recording is made in 16-bit.
1: Audio recording is made in 24-bit.
0001
24BIT
NOTE:
• When 24BIT is selected, the following settings are also required to make the 24BIT
setting valid.
– Setup menu No.020 (SYS FORMAT): 1080i or 720p
– Setup menu No.025 (REC FMT (HD): AVC50 or AVC100
0000
OFF
29.97Hz
0001
ON
Specifies whether or not to make a VFR recording when the recording format is 720p.
0: Does not make VFR recording
1: Makes VFR recording
➝ Refer to "Recording From a Variable Frame-Rate Camera" (page 46).
0000
OFF
Specifies whether or not to make loop recording.
➝For details, refer to "LOOP REC Function" (page 43).
0001
ON
0: Does not make loop recording
1: Makes loop recording
NOTE:
Turning the power off cancels this setting. The unit will then start up using the default
value (OFF) next time it is powered up.
0000
OFF
Specifies whether or not the thumbnail screen or playlist screen appears when the power
THUMB
is turned on.
0001
0: Does not display thumbnail screen and playlist screen.
PLYLST
0002
1: Displays the thumbnail screen.
2: Displays the playlist screen.
0000
LCD
59.94Hz
0001
LCD&M
60-25Hz
0002
LCD&S
Specifies whether the GUI screen will be output to ANALOG MONITOR OUT/SDI
0003
ALL
MONITOR OUT/SDI OUT.
0: Not output (LCD monitor only)
1: Output to LCD monitor and ANALOG MONITOR OUT, SDI MONITOR OUT
2: Output to LCD monitor and SDI OUT
3: Output to LCD monitor and ANALOG MONITOR OUT, SDI MONITOR OUT, SDI OUT
NOTE:
• When 23.98 or 59-23 is selected in setup menu No. 25 (SYSTEM FREQ), the refresh
of the GUI screen output to SDI OUT may seem unnatural. Also, when the GUI screen
switches to the video screen (and vice versa), the output signal may be distorted.
• Some characters on the GUI screen output to ANALOG MONITOR OUT, SDI
MONITOR OUT may not be clear.
Settings and brief function description
only
59-23Hz
60-24Hz
60-25Hz
50Hz
23.98Hz
29.97Hz
only
only
59-23Hz
25Hz
Advertisement
Table of Contents
