Table of Contents
Advertisement
Setup menu setting
No.25: SYSTEM FREQ
29.97
25
59-23
60-24
60-25
Item
FR
SUPER
FR
No.
DISP.
No.
When set to 59.94 Hz
0000
0001
0002
When set to 50 Hz
0000
0001
026
PLY LST FMT
0000
0001
0002
0003
028
AVCHD FMT
0000
0001
0002
031
OUT REF
No.020: SYS FORMAT
1080p
720p
1080p
720p
1080p
720p
---
---
Setting
SUPER
DISP.
59.94Hz
SYSFMT
Specifies the format used by the playlist.
30PN
<In the DVCPRO HD format>
24PN
0: Format set in setup menu No. 020 (SYS FORMAT) and No. 025 REC FMT (HD).
1: 720/30PN (when set to 59.94 Hz)/720/25PN (when set to 50 Hz)
2: 720/24PN
SYSFMT
<In the AVC-Intra format>
25PN
0: Format set in setup menu No. 020 (SYS FORMAT) and No. 025 (REC FMT (HD)).
1: 1080/30PN (when set to 59.94 Hz)/1080/25PN (when set to 50 Hz) or 720/30PN (when
set to 59.94 Hz)/720/25PN (when set to 50 Hz)
2: 1080/24PN or 720/24PN
NOTE:
• When 480i or 576i is selected in setup menu No. 020 (SYS FORMAT), a 30PN and
24PN selection is handled as a SYSFMT setting.
• The number of lines in the AVC-Intra format depends on the setting in the setup menu
No. 020 (SYSFORMAT).
• When a selection other than 59.94 or 50 is made in setup menu No. 25 (SYSTEM
FREQ), the format selected in menu No. 020 (SYS FORMAT) and No. 025 (REC FMT
(HD)) is used.
• This AVC-Intra format also depends on the audio bit number setting in setup menu
No.034 (A.SMPL RES).
PH
59.94Hz
HA
Specifies AVCHD recording rate.
HG
0: PH mode (approx. 21 Mbps)
HE
1: HA mode (approx. 17 Mbps)
2: HG mode (approx. 13 Mbps)
3: HE mode (approx. 6 Mbps)
NOTE:
• Displayed only when an AJ-YCX250G AVCHD codec board (optional) is installed.
• In 720P mode, recording is always made in PH mode.
AUTO
59.94Hz
REF
Select reference for video output.
INPUT
0: Uses the reference signal input to the REF connector as reference. When there is not
input to the REF connector, the selected video input signal is used as reference. When
there is no reference and video input signal, the internal clock is used.
1: The reference input signal is used as reference. If there is no such signal, the internal
clock is used.
2: The video input signal is used as reference. If there is no such signal, the internal clock
is used.
Recording format
No.025: REC FMT(HD)
DVCPRO
---
720/29.97p
---
720/25p
---
720/23.98p
720/23.98p
720/25p
Settings and brief function description
only
50Hz
50Hz
only
50Hz
29.97Hz
25Hz
AVC-Intra50/100
1080/29.97p
720/29.97p
1080/25p
720/25p
1080/23.98p
720/23.98p
720/23.98p
720/25p
only
Setup: Item Settings
183
Advertisement
Table of Contents
