Table of Contents
Advertisement
■ Switching system frequency
Use the steps below to change system frequency.
1
Change setting in setup menu No. 25 (SYSTEM
FREQ).
2
Press the MENU button.
The following confirmation dialog appears to enable the
setting.
Saving Menu Settings to SD Memory Cards
Use the steps below to write SETUP menu settings to or load
from SD memory cards. The unit can handle up to four files
and enables the input of titles.
2,3
3
3
CARD READ
1
Press the MENU button, select A10 CARD READ
from USER1 in the setup menu and press the SET
button.
2
Select the files to be read in the file menu that
appears and press the SET button.
• Files that are not written are indicated as [NO FILE].
• "NO CARD" is indicated when no SD memory card is
inserted.
1
Press the SET button to enable the new setting.
Press the EXIT button to disable the new setting.
3
Turn off the power, then turn it back on again.
The system restarts with the selected system frequency.
SETUP-MENU
SD CARD READ
01 FILE1 1080_60I
02 FILE2 720_60P
* 03 FILE3 480_50I
04 NO FILE
END
3
Press the button with the desired function (see
below) in the load confirmation dialog that appears.
SET button:
Loads all SYSTEM settings and USER 1-5
data
MULTI SEL
Loads USER 1-5 data only
(SHIFT +
SET) button:
EXIT:
Cancels loading and returns to the
previous screen
4
A completion message appears when the load
progress bar closes.
SETUP-MENU
SD CARD READ
FILE3 480_50I
READ OK
203
Setup: Item Settings
Advertisement
Table of Contents
