Table of Contents
Advertisement
Thumbnail Screen Names and Functions
1.
Display status
Display status indicates the type of thumbnails
displayed on the screen.
ALL:
SAME FORMAT:
SELECT:
MARKER:
TEXT MEMO:
SLOT n:
CONTINUOUS PB:
PROPERTY:
P2/REMAIN:
P2/USED:
META DATA:
➝For details on how to change display, refer to
"Switching the type of information that is displayed"
(page 54).
2.
Record mode
Indicates the record mode of the clip at the cursor
position.
3.
System format
Indicates the recording format of the clip at the cursor
position.
4.
Duration
Indicates the length (duration) of the clip at the cursor
location and the rough location of current playback.
When resume is set to on (➝ Refer to "Setting items to
display" (page 55)) and the playback start position is
not the beginning of the clip, the rough location of the
playback position is displayed.
5.
Selected number of clips
Indicates the number of selected clips and the total
number of clips.
50
Clip Management: Thumbnail and Clip Management
All clips
Clips with the same format
as the system
Clips selected with the SET
button
Clips with shot markers
Clips with text memo data
Clips on P2 card in slot No.
n
Clips for continuous
playback
Detailed clip information
Media information (amount
of remaining space)
Media information (amount
of space used)
Set meta data
6.
Time display
One of the following data is displayed: the TC (time
code)/UB (user bit) at the start of clip recording/time of
shooting/day of shooting/date and time of shooting/
clip name/the user clip name/slot number.
➝Refer to "Setting items to display" (page 55).
7.
Thumbnail
Shows the thumbnails recorded for each clip. The
EXCH.THUMBNAIL function allows you to replace this
thumbnail.
➝Refer to "Thumbnail Editing" (page 57).
8.
Clip no.
Indicates the numbers assigned to P2 card clips,
which are normally assigned starting in order from the
earliest shooting date. Numbers of clips that cannot be
played back are shown in red. The SORT function
allows you to change the order the clips appear.
➝Refer to "Setting items to display" (page 55).
M
9.
Shot mark indicator
Indicates that a shot mark has been attached to a clip.
P
10.
Proxy indicator
Indicates that a clip contains a proxy attached using
the AJ-HPX2700, AJ-HPX3700 or other camera.
This unit cannot record proxies.
T
11.
Text memo indicator
Indicates a clip that contains text memo data.
E
12.
Edit Copy indicator
Indicates an edit-copied clip.
W
13.
Wide indicator
Indicates a clip recorded in the 16:9 aspect ratio. This
is not indicated for an HD format clip.
!
14.
Incomplete clip indicator
Indicates a clip spanning multiple P2 cards where one
of the cards that contain part of the clip has not been
inserted.
Advertisement
Table of Contents
