Menu - Panasonic AJ-HPD2500P Operating Instructions Manual

MENU

This menu is used for menu settings.
Item
FR SUPER
No. DISP.
A00 LOAD
A01 SAVE
A02 P.ON LOAD
A03 MENU LOCK
A04 PF1 ASSIGN
A05 PF2 ASSIGN
A06 PF3 ASSIGN
A10 CARD READ
A11 CARD WRITE
A12 CARD FORMAT
202
Setup: Item Settings
Setting
FR SUPER
No. DISP.
0000 USER2 Specifies user files loaded in USER 1.
0: Loads the contents of USER 2
0001 USER3
1: Loads the contents of USER 3
0002 USER4
2: Loads the contents of USER 4
0003 USER5
3: Loads the contents of USER 5
NOTE:
Pressing the MENU button when loading completes opens a
confirmation dialog. Press the SET button to store the setting. Press
the EXIT button to discard the change and retain the setting.
0000 USER2 Specifies the user file that saves USER 1 settings.
0: Saved to USER 2
0001 USER3
1: Saved to USER 3
0002 USER4
2: Saved to USER 4
0003 USER5
3: Saved to USER 5
0004 LOCKED
4: Appears when all user files are write protected.
NOTE:
• A user file in change prohibit status cannot be selected.
• When all user files are in the change prohibit status, "LOCKED"
appears and data cannot be saved.
0000 OFF Specifies which user files will be loaded into USER 1 and whether or
not the USER 1 settings should be used in startup when the power is
0001 USER2
turned on.
0002 USER3
0: Operation is started with the settings of the previously set user file.
0003 USER4
1: The content of USER 2 is loaded into USER 1.
0004 USER5
2: The content of USER 3 is loaded into USER 1.
3: The content of USER 4 is loaded into USER 1.
4: The content of USER 5 is loaded into USER 1.
0000 OFF Sets/releases the user file (USER2 - USER 5) lock mode.
0: Releases the lock. (File data can be changed.)
0001 ON
1: Lock is engaged. (File data cannot be changed.)
NOTE:
• USER 1 cannot be locked.
• Files can be loaded from the SD memory card even if they are
locked. The status after load operation depends on the setting
defined by the loaded data.
Registers a setup menu item in the PF1 button.
Registers a setup menu item in the PF2 button.
Registers a setup menu item in the PF3 button.
Select files from the four SD memory card files to load into the menu.
This function is available only to USER 1-5 (SYSTEM) and USER 1-5.
Select one of the four files on an SD memory card to write a menu
setting.
The write function is available only to USER 1-5 (SYSTEM).
Titles can be added to the files and the files can be edited.
Formats SD memory cards.
• XX indicates factory default settings.
Settings and brief function description Remarks
Setting available
for USER1 only
Setting available
for USER1 only
Setting available
for USER1 only
Setting available
for USER2 to
USER5 only
Setting available
for USER1 only
Setting available
for USER1 only
Setting available
for USER1 only