Listening Edit Recording - Panasonic SL-PR300 Operating Instructions Manual

Recording onto CD-R/RW Discs
"DISC DUBBING?" is shown in the information display.
• When a blank disc is in the CDR tray, "UPDATE OPC" is
shown following "DISC DUBBING".
The 3-CD changer and CDR start simultaneously.
• Recording starts from the first track of the CD.
When recording completes, "STOP DUBBING" flashes and
recording automatically stops.
Notes
• Recording can only start if the total time of the tracks on the
source disc is less than the time remaining on the disc being
recorded to. If the track time on the source disc is longer, the
message "SHORT REMAIN" is shown in the information dis-
play and the dubbing function is ended.
• If a track on the source disc is of SCMS format, the message
"SCMS PROTECT" is shown in the information display, and
the dubbing function is ended.
• In the 1 Disc Dubbing mode, finalize the disc manually.

Listening Edit Recording

Selected tracks can be programmed and recorded.
3
1
COMPACT DISC RECORDER SL-PR300
OPEN / DISC
POWER CLOSE SELECTOR
3 3
DISC
2
DISC 2
1
DISC
1
PHONES
MIN MAX
PLAY MODE CD EDIT CD REC
1
DISC SELECTOR
1
CD1
CD REC CD EDIT
1
4
7
0
PLAY
MODE REPEAT
•
REC
5
REC MUTE
1
4
COMPACT DISC RECORDER
1
Select and stop the CD to be recorded.
2
Load a recordable CD-R or CD-RW in the CDR
tray.
• The disc is read.
3
Press the CD EDIT button (main unit/remote
control) to select the Listening Edit mode.
Main Unit
CD EDIT
2
MULTI JOG
REC LEVEL
–
+
OPEN /
CLOSE
REC SELECTOR
DIGITAL CD LINE
MIX BALANCE
LINE CD
SYNCHRO MENU SET CANCEL
REC/
FINALIZE REC MUTE
4
5
CANCEL
CD2 CD3
3
FINALIZE DISPLAY
2 3
5 6
8 9
_ >
10
CONTROL
CD CD-R/RW
FADE SYNCHRO
+
PITCH
SET
PITCH– CANCEL
RAK-PR300
Remote Control
CD EDIT
"LISTEN EDIT" is shown in the information display for 3 seconds,
the LISTENING EDIT edit recording indicator is shown in the dis-
play window.
• The CD trays of the 3-CD changer cannot be opened once the
listening edit mode is activated.
• If tracks have already been programmed for the CDs, "LAST L-
PG OK?" is shown in the information display. Press the SET
button on either the remote control or the main unit or press the
PLAY button on the main unit to record the same programmed
tracks.
Recording starts.
To program new tracks, press the CANCEL button and then
proceed to step 4.
4
Program the tracks while the CD is playing by
assigning a tag to each track on the disc.
• This is done by pressing either the SET button (main unit/
remote control) to add the track to the program or the CANCEL
button (main unit/remote control) to skip the track.
a. When the track now playing is to be recorded
SET
The track is stored in the memory, and
operation moves on to the next track.
b. When the track is not to be recorded
CANCEL
The track is not stored in the memory,
and operation moves on to the next
track.
When the first track has been stored in memory
Play time of second track
CD PLAYER 2 3 4 5
LISTENING EDIT
6 7 8 9 10
CD REC
"1" is cleared from the music calendar.
After making the last programming choice, "START TO DUB?" is
shown in the information display. Press the SET button (main unit/
remote control) to continue or the CANCEL button (main unit/
remote control) to end the function.
Note
• Up to 32 steps can be included in the programming. The same
track cannot be programmed twice.
When there is not much recording time left on the CD-R or CD-
RW disc, tracks that are longer than the remaining time (pre-
calculated) can be programmed but "NO REM" is shown in the
information display.
5
Press the CDR Control PLAY p or 1 REC/REC
MUTE button on the main unit or the 1 REC/
REC MUTE button on the remote control.
Recording of the selected songs will begin.
Recording time remaining on the
CD-R/RW disc (pre-calculated)
SYNCHRO
DIGITAL REC HIGH SPEED AUTO TRACK
CD-R
44.1 L
kHz
– 40 30 20 15 10 6 3 0 dB
R
RQT6087