How To Use The Remote Setup Function; Remote Setup Edit [700] - Panasonic WJ-AV20 Operating Instructions Manual

HOW TO USE THE REMOTE SETUP FUNCTION

Remote Setup Edit ..................................................................... [700]
The settings at a remote site can be downloaded at the control site, edited, and then uploaded again.
0 0 0 T O P
↓
- - - M O D E ( R E C E I V E R )
- - - - - - - -
- - - - - - - -
- - - - - - - -
5 0 0 R E M O T E
6 0 0 M A I N T E N A N C E
7 0 0 R E M O T E
↑ ↓
: M O V E E N T : S E L E C T
D O W N L O A D ? ( R E M O T E T O L O C A L )
Y E S N O
← → : S E L E C T E N T : E X E C E S C : C L E A R
N O W D O W N L O A D I N G
P L E A S E W A I T
E S C : Q U I T
7 0 0 R E M O T E S E T U P
↓
1 0 0 M O D E ( R E C E I V E R )
2 0 0 R E C E I V I N G
3 0 0 D I R E C T O R Y / D I A L I N G
↓
4 0 0 S E T U P
U P D A T E D O N
↑ ↓
: M O V E E N T : S E L E C T
64
↓
C O N T R O L / S E T U P
↓
↓
S E T U P E D I T
E S C : C L E A R
d
d
d
E D I T
↓
R E G I .
↓
R E G I .
0 8 / 0 1 / 9 9 :
E S C : P R V
Call a remote site to edit the settings.
1
Take the following steps when the line is connected.
2 Press the MENU button.
The [000 TOP] menu appears on the monitor screen.
Move the cursor to the item 700 in the menu
3
by pressing the
the ENTER button.
The dialog menu appears on the monitor screen, asking
you to enable or disable the downloading of the settings
from the remote site.
Select [YES] by pressing the t or s button.
4
Then press the ENTER button.
A data transfer message appears on the monitor screen.
When the data is successfully downloaded, the [700
REMOTE SETUP EDIT] menu appears on the monitor.
Notes
• Video, audio, and data cannot be sent during data
transfer.
• If the ESC button is pressed while the [NOW DOWN-
LOADING] display is on, a message appears, asking
whether or not to quit the data transfer. It can be quit by
first selecting [YES] with the Direction button and then
pressing the ENTER button.
• If an error occurs during data transfer, a transfer failure
message appears. Press the ESC button to return to the
menu [000 TOP]. Repeat the above steps.
• The video received from the remote site may be dis-
played in still after the settings of the remote site are
downloaded. In that case, disconnect the line and then
repeat the procedure again.
Receiver
or button. Then press