Table of Contents
Advertisement
Question commands
◆ NOTE:
• The initial [STX] and final [ETX] codes in send commands and return (completion) messages are not included in the table.
• A return (completion) message returns [ACK] when data is received. Then an execution message is returned. The execution messages are
described in the table below.
Command
CTL/TC DATA
REQUEST
STATUS REQUEST
ID REQUEST
156
Connections: RS-232C Interface
Question
Send command
Counter value
QCD
Operating mode
QOP
Device used
QID
Return (completion)
data
message
CD data
data = f w gh mm ss ff
f = F
w= S
gh=
CTL mode
When plus g= SP (20h)
When minus
TC mode
gh=00–23: hours
mm= 00–59: minutes
ss= 00–59: seconds
[When set to 59.94 Hz]
[When set to 50 Hz]
data
OFF: FAST FORWARD
OPL: PLAY
ORC: REC
ORW: REWIND
OSP: STOP
SRS: (IN/OUT) PREROLL
OSF: SHTL FORWARD
OSR: SHTL REVERSE
OJG: JOG FORWARD/REVERSE
OSW: VAR FORWARD/REVERSE
data
AJ-HPD2500P: For the AJ-HPD2500P
AJ-HPD2500E: For the AJ-HPD2500E
– (2Dh)
h=0–9: hours
ff=00–29: frames
ff=00–24: frames
Advertisement
Table of Contents
