Table of Contents
Advertisement
2)
Disk information
The following information appears.
Hard disk that
PARTITION:
makes it possible
to read and write
VENDOR:
data by card
MODEL:
(TYPE S,
SIZE:
P2 store).
USED:
FREE CAP.:
SELECTED
PART.:
Hard disks other
PARTITION:
than above
VENDOR:
(FAT, OTHER).
MODEL:
SIZE:
FREE CAP.:
SELECTED
PART.:
◆ NOTE:
• When a hard disk with a capacity of 2 TB or more is
connected, "OVER 2TB" is shown at "SIZE:".
3)
Partition information (for a TYPE S hard disk or P2
store disk)
TYPE S/
P2 STORE
Name of vendor
Model name
Total capacity
(unit: GB)
Memory used
(unit: GB)
Used P2 card
area (unit: cards)
up to 23 cards
Folder information (for a FAT type hard disk)
Remaining
capacity
(Unit: GB)
Number of
selected
partitions
FAT/OTHER
Name of vendor
Model name
Total capacity
(unit: GB)
Remaining
capacity
(Unit: GB)
Number of
4)
Hard disk indicator
selected folders
Hard Disk Operations
Selecting partition or folder as target
Selecting a partition or folder as target allows you to use the
MULTI SEL (SHIFT + SET) buttons to select all the clips in the
selected partition or folder and display them as thumbnails.
Such partitions/folders can also be used as a playlist player to
enable editing of hard disk data.
➝Refer to "Creating Playlists" (page 97).
Use the following steps to select up to six partitions or folders
to use in this way.
1
Use the cursor buttons to select a partition or folder
in the hard disk explorer screen.
2
Press the ENTRY button.
:
Check marks appear for
selected partition.
NUMBER (NO.):
Partition number (1 - )
MODEL:
P2 card model name
PARTITION
Name assigned to partition
NAME:
(➝ Refer to "Naming a partition"
(page
132))
DATE/TIME:
Date and time of partition
recording
SERIAL:
P2 card serial number
:
Check marks appear for
selected folder.
NUMBER (NO.):
Folder number (1 - )
FOLDER NAME:
Folder name (does not include
CONTENTS folders)
DATE /TIME:
Folder creation date
◆ NOTE:
• Use the right and left cursor buttons to toggle between the
partition names and serial names for TYPE S hard disks.
• The partition information for an invalid partition on a P2
store is indicated in gray.
• Select [PROPERTY] – [FREE CAP. OF PARTITION] in the
menu to check the remaining capacity of the partition.
Indicates whether or not a hard disk is connected and
hard disk type.
Connections: Using This Unit With a Hard Disk
131
Advertisement
Table of Contents
