Playing Back Single Clips - Panasonic AJ-HPD2500P Operating Instructions Manual

Playing Back Single Clips

To play back the clip at the cursor location, hold down the
SHIFT button and press the PLAY
1
2
3
1
Open the thumbnail screen.
2
Use the cursor buttons to select the clip you want to
play back.
3
Press the 1 CLIP PLAY (SHIFT + PLAY) button.
◆ NOTE:
• The thumbnail screen appears when playback stops at the
end of the clip or when the STOP
The cursor then moves to the next clip.
• All buttons other than the STOP
during single clip playback.
• Select [PB POSITION] from the menu to determine the
playback start position for the single clip playback. If
[RESUME] is selected on the [PB POSITION] menu, this
setting is invalid.
• STOP MODE is disabled for playback of single clips.
• When playback is started in the thumbnail screen and a still
picture is displayed by JOG/VAR/SHTL, pressing the 1 CLIP
PLAY (SHIFT + PLAY) button starts playback from the still
picture position to the end of the clip.
60
Clip Management: Playing Back Clips
button.
button is pressed.
button are not available